农村婬乱男女A片爽视频麻豆软件,国产av一区二区三区,一级a性色生活片久久无

為客戶提供技術選型、安裝指導和完善的售后服務

產品覆蓋全國港機重工、集裝箱碼頭、電廠、航運、鋼鐵廠及礦山等各大企業。

世界知名品牌

主要經營意大利ARISTONCAVI柔性電纜、德國PRYSMIAN柔性電纜、德國BROSA傳感器、HARTMAN電纜卷筒及集電環、日本神鋼鋼絲繩和德國DIEPA鋼絲繩等機電、機械產品

深受廣大港口碼頭及各種重工生產制造商的歡迎

首頁

/

產品分類

/

德國普睿斯曼電纜

/

CORDAFLEX(SMK)





產品描述

This new cable was developed in close alignment to the CORDAFLEX (SMK) concept and is now available after intensive trials in practice. The "V" stads for vertical haul-off.

The advantages:

Extremly high tensile loading	Central support element with 20 kN(or 50kN)ultimate load
High torsional strength	Strengthened anti-torsion braid
Lateral stability	Compact design, compressively strong material, anti-kink core insulation
Non-wearing, tearing or further tearing	Thickened sheath system of special compound
Optimized diameter and weight	Special insulating material, 3-sheath system
Hightly flexible conductor construction	Short length of lay, sliding core arrangement

The diameter and weight are, of course, unchanged in comparison to our popular CORDAFLEX (SMK) design. The benefit is obvious; problem-free exchange of the two cable types.

Please note the new order number. These new designs are immediately available from stock.

No. of cores and cross-section	Material-Number	List price [Euro] for Cu at 150Euto/100kg	Cu factor	Max. diameter[mm]	Weight [kg/m]	Tensile force[N]
49×1(20KN)	5DH3 291	38,818.-	546	29.6	1.26	3,200
24×2.5(20KN)	5DH3 295	31,379.-	672	29.2	1.34	3,600
30×2.5(20KN)	5DH3 296	34,749.-	840	32.4	1.68	4,100
44×2.5(20KN)	5DH3 298	53,272.-	1232	37.1	2.28	5,100
56×2.5(20KN)	5DH3 290	71,223.-	1567	43.1	3.03	6,000

48×1.5(50KN)	5DH3 990	82,292.-	726	40.3	2.06	4,860
48×2.5(50KN)	5DH3 958	96,473.-	1294	46.1	3.00	6,300

Explanatory notes:

The current, valid design is the CORDAFLEX (SMK)-V. This cable meets the hard demands of vertical cable reeling in all respects and is a further development of the popular CORDAFLEX(SM), whereby the positive aspects of the new generation of flexible reeling cables of the (SMK) generation have been taken fully into account.

The essential design features of the CORDAFLEX (SMK)-V are the anti-kinking, lateral pressure insensitive cores of special compound, the thickened sheating of the (SMK) design made of non-wearing, tearing or further tearing, high-quality sheath compound, the highly flexible conductor construction and the higher permissible tensile loading that lies above 30 N/mm2.

The standard CORDAFLEX (SMK) and the comparable CORDAFLEX (SMK)-V designs correspond to each other in diameter and weight.

We differentiate on the (SMK)-V designs between the layered and bundled lay of the cores. The layered core is the standard design, whereas the bundled design absorbs more torsional forces in use. The bundled lay design makes for longer life. In addition, the bundled core design is fitted with an even stronger support element in the centre of the cable (with an ultimate loading factor of 50 KN).

The 48×2.5 design is of the same diameter as CORDAFLEX (SM)44×2.5 to allow replacement of this cable on rigid drive systems between the reel and spreader cable motors at any time.

Furthermore, we have kept the well proven CORDAFLEX (SM) cable in our range, first of all for replacement purposes, but also for customers who wish to continue to use this cable because the changeover to CORDAFLEX (SMK) –V often involves a modification to the reel and/or the reel setup.

The CORDAFLEX (SMK) cable for the general reeling application, shown under item 2, complete the fact and gives you a general overview.

Supplementary Sheet

1 CORDAFLEX (SMK)-V (current valid design)

No. of cores and cross-section	Material-Number	Conductor construction	Outer diameter max. [mm]	Tensile force max. [N]	Weight [kg/m]
49×1(20KN)	5DH3 291	Layers	29.6	3,200	1.26
24×2.5(20KN)	5DH3 295	Layers	29.2	3,600	1.34
30×2.5(20KN)	5DH3 296	Layers	32.4	4,100	1.68
44×2.5(20KN)	5DH3 298	Layers	37.1	5,100	2.28
56×2.5(20KN)	5DH3 290	Layers	43.1	6,000	3.03

48×1.5(50KN)	5DH3 990	Bundles	40.3	4,860	2.06
48×2.5(50KN)	5DH3 958	Bundles	46.1	6,300	3.00

2 CORDAFLEX (SMK)(earlier design)

(Succeeded by CORDAFLEX (SMK)-V this design no longer exist.

Was an interim solution as development of CORDAFLEX (SMK)-V was not finished.)

No. of cores and cross-section	Material-Number	Conductor construction	Outer diameter max. [mm]	Tensile force max. [N]	Weight [kg/m]
46×1(20KN)	5DH3 191	Layers	29.6	3,200	1.21
24×2.5(20KN)	5DH3 195	Layers	29.2	3,600	1.31
30×2.5(20KN)	5DH3 196	Layers	32.4	4,100	1.64
44×2.5(20KN)	5DH3 198	Layers	37.1	5,100	2.19
56×2.5(20KN)	5DH3 190	Layers	43.1	6,000	2.85

3 CORDAFLEX (SMK)(earlier design)

(Old design-before introduction of the latest generation, used for replacement needs!

No. of cores and cross-section	Material-Number	Conductor construction	Outer diameter max. [mm]	Tensile force max. [N]	Weight [kg/m]
46×1(12KN)	5DH3 878	Layers	38.0	2,600	1.83
24×2.5(20KN)	5DH3 863	Layers	35.7	3,500	1.64
30×2.5(20KN)	5DH3 845	Layers	41.5	3,950	2.26
36×2.5(6KN)	5DH3 691	Layers	41.0	3,400	2.32
44×2.5(20KN)	5DH3 692	Layers	46.1	5,000	2.79